Vertical Xcelerator IP Guia do Utilizador descarregar pdf (Página 19)

Assembling the IP Phone 2-7

Chapter 2 - Install & Connect the Phone

Xcelerator IP User Guide March 2007

Mounting the Phone On the Wall

The IP phone can be used on the desktop or mounted on a wall.

Print the screw alignment template (on the next page) and tape it on the wall to

position the 3 screws provided at the right place for the mount-holes on the phone.

Before mounting the IP phone to the wall, detach the handset and curled cord from

the IP phone, then perform the following steps:

Step A On the back of the phone, find the latch (3) on the U-type leg

and remove it.

Step B Remove the other latch (4).

Step C Remove the U-type leg (1). Retain the leg (1) and latches (2) for

possible reuse in a desktop mode.

Step D Seat the big U-type frame onto the back of IP phone.

Step E Re-check that the power source switch is in the correct position.

Connect all cables to the jacks on the phone, then mount the

phone's holes (5 top, 6 left and 7 right) to the screws on the

wall.

Step F Under the hook switch, find and press the cradle latch (8) to let

it down. Then hang up the handset and re-attach the curled

cord.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 63 64

Sem comentários

Vertical Xcelerator IP Guia do Utilizador Página 19